|
» home » wire loom » convoshield » convoshield performance data
|
Back to ConvoShield™
| Heat Aging |
Aged at 170°C for 168 hours |
No damage to product |
| Cold Bend Test |
Low temperature flexibility |
-40°C |
| BH100-003 (ref MS-NA1-7) |
Fluid resistance (30 min soak)
Brakes Fluid, Gasoline, Diesel Fuel(60 min), Antifreeze Solution, Motor Oil, Transmission Fluid, Power Steering Fluid, Distilled Water, 3% Salt Solution, Washer Fluid |
No sign of product degradation or delamination of coating |
| Heat Distortion |
Oven aging at 180°C for 3 hours |
Product not flat or distorted |
| FMVSS 302 Automotive |
Flammability Test |
Pass |
| Applied voltage rate of 500 V/s in dielectric chamber |
Electrical Conductivity |
Classed insulative in 12V applications |
| Exterior Surface |
Highly Reflective Aluminum |
n/a |
| Substrate Base |
Nylon Copolymer |
n/a |
| Substrate Surface |
Thermoplastic Molded Tubing |
n/a |
The information given herein is believed to be reliable. AutomotiveOrganizer.com and/or Bentley-Harris make no warranties as to their accuracy or completeness and disclaim any liability in connection with its use. AutomotiveOrganizer.com and the manufacturer's only obligations are those in the standard terms of sales of this product and will not be liable for any consequential or other damages and losses arising out of the use or misuse of this product. Users should make their own evaluation to determine the suitability of the product for specific applications. |
|
