FEP Heat Shrink Tubing Specifications | AutomotiveOrganizer.com

FEP Heat Shrink Tubing
1.3:1 Ratio - Specifications
Back to FEP Heat Shrink

AWG TUBING
Ordered as AWG Size No.	As Supplied Inside Diameter Minimum	Recovered Dimension After Shrinking
		I.D. Will Shrink to at Least	Wall Thickness
		I.D. Will Shrink to at Least	Min.	Nom.	Max.
24	0.031	0.027	0.006	0.008	0.010
22	0.036	0.032	0.006	0.008	0.010
20	0.045	0.039	0.006	0.008	0.010
18	0.060	0.049	0.006	0.008	0.010
16	0.075	0.061	0.007	0.009	0.011
14	0.092	0.072	0.007	0.009	0.011
12	0.115	0.089	0.007	0.009	0.011
10	0.141	0.114	0.007	0.010	0.013
9	0.158	0.124	0.007	0.010	0.013
8	0.180	0.143	0.007	0.010	0.013
7	0.197	0.158	0.007	0.011	0.015
6	0.225	0.180	0.007	0.011	0.015
5	0.248	0.198	0.007	0.011	0.015
4	0.290	0.226	0.007	0.011	0.015
3	0.310	0.249	0.007	0.011	0.015
2	0.365	0.280	0.008	0.012	0.016
1	0.400	0.311	0.008	0.012	0.016
0	0.440	0.349	0.008	0.012	0.016

FRACTIONAL INCH TUBING
Size		As Supplied Inside Diameter Minimum	Recovered Dimension After Shrinking
Frac.	Decimal		I. D. Will Shrink to at Least	Wall Thickness
Frac.	Decimal		I. D. Will Shrink to at Least	Min.	Nom.	Max.
3/8	0.375	0.500	0.383	0.011	0.015	0.019
7/16	0.438	0.580	0.448	0.016	0.020	0.024
1/2	0.500	0.666	0.510	0.016	0.020	0.024
5/8	0.625	0.830	0.637	0.021	0.025	0.029
3/4	0.750	1.000	0.764	0.026	0.030	0.034
7/8	0.875	1.170	0.891	0.031	0.035	0.039
1	1.000	1.330	1.020	0.031	0.035	0.039
1-1/8	1.125	1.666	1.270	0.031	0.035	0.039
1-1/4	1.250	1.666	1.270	0.031	0.035	0.039
1-3/8	1.375	1.833	1.390	0.031	0.035	0.039
1-1/2	1.500	2.000	1.520	0.031	0.035	0.039

APPLICABLE SPECIFICATION: MIL-I-23053/11
PACKAGING STANDARD LENGTHS, 4 foot STBE
Other lengths quoted upon request
CUSTOM SPECIFICATIONS AND TOLERANCES QUOTED UPON REQUEST
PFA Quoted Upon Request

UL File # E64007
CSA File # 082582

Passes flame test, csa